How to install mods on an Abiotic Factor server
To install mods on an Abiotic Factor server with OuiHeberg, enter their mod.io IDs in the Mod IDs variable of OuiPanel, the OuiHeberg game panel. Then restart the server. It downloads the mods at every start, with no mod.io token.
This guide follows each step, from the mod's ID to the restart. Is your server not ready yet? First follow the guide How to set up an Abiotic Factor dedicated server. If you are looking for Abiotic Factor server hosting, our plans are listed on our sales page.
Which mods can you use on an Abiotic Factor server?
According to Deep Field Games, Abiotic Factor accepts mods from mod.io since its version 1.5, released in October 2026. The server downloads them itself, from their IDs.
On our servers, mods are therefore installed by their mod.io IDs. You have no files to upload, and no mod.io token to provide.
Find the ID of a mod
Open the game's mods page at mod.io/g/abiotic-factor.
Open the page of the mod you want.
Note its ID, the number shown as “# ID” on the mod's page.
Do the same for the mods it depends on, if it has any.
Add the mods in OuiPanel
Log in to OuiPanel at dash.ouipanel.com and open your Abiotic Factor server.
Open Configuration › Server Settings, then scroll down to the Environment Variables block.
In Mod IDs, type the IDs, separated by semicolons and with no spaces.
Click the check mark on the right of the field to save it. Its tooltip reads Save.

Here is the expected format, with two sample IDs to replace with yours.
1111111;2222222
The field accepts up to 50 IDs, made of digits only.
Restart the server to load the mods
The server reads Mod IDs at the start. After a change, click Stop, wait for Offline, then click Start.
The stop can take a few minutes, while the game saves the world. The guide How to set up an Abiotic Factor dedicated server explains why.
At the start, the server downloads the mods, then loads them. The Console log shows it with a line like this one, here for a single mod.
Server mods ready, 1 mounted
We saw this on a test server, with no mod.io token. Mods are not in the panel's backups. The server downloads them again at every start.
According to the studio, each player downloads the mods when joining a modded server. We have not tried a mod in the game with a player yet.
Remove a mod
First create a backup in the Backups tab.
In Mod IDs, delete the mod's ID and its semicolon, then click the check mark.
Stop the server, then start it. When left empty, the field loads no mods.
Keep your mods after a game update
According to the studio, an Abiotic Factor update disables mods until their author adapts them. After an update, look on each mod's page to see whether it has been adapted.
Also keep Automatic update enabled. The server should then follow the game version of your players.
If a mod does not load
| Symptom | Solution |
|---|---|
| The field rejects the value | It only accepts digits separated by semicolons, with no spaces and no semicolon at the end, 50 IDs at most |
| The mod is not loaded after the change | The server reads the field at the start. Stop it, wait for Offline, then click Start |
| A mod is missing from the log | Read its ID again on mod.io, and also add the mods it depends on |
| A mod no longer works after a game update | According to the studio, it stays disabled until its author adapts it |
Need help?
Open a ticket from Tickets › Open a Ticket, or from the Contact support tile at the bottom of your server's page in the client area. You can also ask your question on the OuiHeberg Discord.
Abiotic Factor server hosting from $6.92/mo, on the Deep Field Games dedicated server with 6 GB of RAM or more, SFTP access, backups and DDoS protection included.
View plans →